This PS3 form factor PSU has a real power rating of 300W (continuous). Its standard PS3 dimensions make it a suitable PSU for most of the Micro-ATX chassis available on the market where a standard ATX size PSU would be too big to fit. Like most PS3 power supply units, it can also be used in any ATX case.
The cooling fan of the FSP300-60HPC is located on the bottom side to help reduce the overall noise level of the system.
Features:
- Real 300 Watts rating
- Low ripple & noise
- Over voltage protection
- ErP 2010 compliant
- Active PFC
- PS3 size: 150x100x85.7mm
 |
 |
 |
Specifications:
| Output Table | ||||||||
| AC Input | 207~265V, 2A, 47~53Hz | |||||||
| DC Output | +3.3V | +5V | +12V1 | +12V2 | -12V | +5Vsb | ||
| Max Output Current | 21A | 15A | 16A | 8A | 0.3A | 2.5A | ||
| Max Combined Power | 103W | 240W | 16.1W | |||||
| Total Power | 300W | |||||||
| Peak Power | ||||||||
| Dimension | Depth | Width | Height |
| (mm) | 100 | 150 | 85.7 |
| PSU Load |
20% | 50% | 100% |
| Efficiency | 70% | 75% | 75% |
Connectors:
| Motherboard | |
 |
 |
| ATX 12V 24 Pin | 1x ATX 12V 20+4 Pin |
| CPU | ||
 |
 |
 |
| CPU 8 Pin | CPU 4+4 Pin | 1x CPU 4 Pin |
| Graphics | |
 |
 |
| PCI-E 2.0 6+2 (8) Pin | PCI-E 2.0 6 Pin |
| Peripherals | |||
 |
 |
 |
 |
| 2x S-ATA | 2x Molex 4 Pin | 1x Floppy 4 Pin | Fan 2 Pin |